Baptista, S., Araújo, D., Concórdio-Reis, P., Marques, A. C., Fortunato, E., Alves, V. D., & Freitas, F. (2022). Deacetylation and Desuccinylation of the Fucose-Rich Polysaccharide Fucopol: Impact on Biopolymer Physical and Chemical Properties. Molecules27(21), 7165. https://doi.org/10.3390/molecules27217165

Bevans, B., Ramalho, A., Smoqi, Z., Gaikwad, A., Santos, T. G., Rao, P., & Oliveira, J. P. (2023). Monitoring and flaw detection during wire-based directed energy deposition using in-situ acoustic sensing and wavelet graph signal analysis. Materials & Design225, 111480. https://doi.org/10.1016/j.matdes.2022.111480

Carrêlo, H., Escoval, A. R., Soares, P. I. P., Borges, J. P., & Cidade, M. T. (2022). Injectable Composite Systems of Gellan Gum:Alginate Microparticles in Pluronic Hydrogels for Bioactive Cargo Controlled Delivery: Optimization of Hydrogel Composition based on Rheological Behavior. Fluids7(12), 375. https://doi.org/10.3390/fluids7120375

Centeno, P., Alexandre, M., Neves, F., Fortunato, E., Martins, R., Águas, H., & Mendes, M. J. (2022). Copper-Arsenic-Sulfide Thin-Films from Local Raw Materials Deposited via RF Co-Sputtering for Photovoltaics. Nanomaterials12(19), 3268. https://doi.org/10.3390/nano12193268

Concórdio-Reis, P., Pereira, J. R., Alves, V. D., Nabais, A. R., Neves, L. A., Marques, A. C., Fortunato, E., Moppert, X., Guézennec, J., Reis, M. A. M., & Freitas, F. (2022). Characterisation of Films Based on Exopolysaccharides from Alteromonas Strains Isolated from French Polynesia Marine Environments. Polymers14(20), 4442. https://doi.org/10.3390/polym14204442

Correia, A., Tavares, V. G., Barquinha, P., & Goes, J. (2022). All-Standard-Cell-Based Analog-to-Digital Architectures Well-Suited for Internet of Things Applications. Journal of Low Power Electronics and Applications12(4), 64.

Correia, R., Deuermeier, J., Correia, M. R., Vaz Pinto, J., Coelho, J., Fortunato, E., & Martins, R. (2022). Biocompatible Parylene-C Laser-Induced Graphene Electrodes for Microsupercapacitor Applications. ACS Applied Materials & Interfaces14(41), 46427–46438. https://doi.org/10.1021/acsami.2c09667

Costa, P. A., Barreiros, M. A., Mouquinho, A. I., Oliveira e Silva, P., Paradela, F., & Oliveira, F. A. C. (2022). Slow pyrolysis of cork granules under nitrogen atmosphere: by-products characterization and their potential valorization. Biofuel Research Journal9(1), 1562–1572. https://doi.org/10.18331/BRJ2022.9.1.3

Cunha, J., da Silva, M. P., Beira, M. J., Corvo, M. C., Almeida, P. L., Sebastião, P. J., Figueirinhas, J. L., & de Pinho, M. N. (2022). Water Molecular Dynamics in the Porous Structures of Ultrafiltration/Nanofiltration Asymmetric Cellulose Acetate–Silica Membranes. Membranes12(11), 1122. https://doi.org/10.3390/membranes12111122

Ferreira, I. A., Oliveira, J. P., Antonissen, J., & Carvalho, H. (2023). Assessing the impact of fusion-based additive manufacturing technologies on green supply chain management performance. Journal of Manufacturing Technology Management34(1), 187–211. https://doi.org/10.1108/JMTM-06-2022-0235

Ferreira, R., Shaikh, M., Jakka, S. K., Deuermeier, J., Barquinha, P., Ghosh, S., Fortunato, E., Martins, R., & Jana, S. (2022). Bandlike Transport in FaPbBr 3 Quantum Dot Phototransistor with High Hole Mobility and Ultrahigh Photodetectivity. Nano Letters22(22), 9020–9026. https://doi.org/10.1021/acs.nanolett.2c03317

Gago, D., Corvo, M. C., Chagas, R., Ferreira, L. M., & Coelhoso, I. (2022). Protein Adsorption Performance of a Novel Functionalized Cellulose-Based Polymer. Polymers14(23), 5122. https://doi.org/10.3390/polym14235122

Gavinho, S. R., Pádua, A. S., Sá-Nogueira, I., Silva, J. C., Borges, J. P., Costa, L. C., & Graça, M. P. F. (2022). Biocompatibility, Bioactivity, and Antibacterial Behaviour of Cerium-Containing Bioglass®. Nanomaterials12(24), 4479. https://doi.org/10.3390/nano12244479

Gradišek, A., Apih, T., Beira, M. J., Cruz, C., Fernandes, S. N., Godinho, H. M., & Sebastião, P. J. (2022). Observing short-range orientational order in small-molecule liquids. Scientific Reports12(1), 22500. https://doi.org/10.1038/s41598-022-27187-7

He, B., He, G., Jiang, S., Liu, J., Fortunato, E., & Martins, R. (2023). Electrospun Stacked Dual‐Channel Transistors with High Electron Mobility Using a Planar Heterojunction Architecture. Advanced Electronic Materials9(2), 2201007. https://doi.org/10.1002/aelm.202201007

Machado, C., Vilarigues, M., Pinto, J. V., & Palomar, T. (2022). The Influence of Raw Materials on the Stability of Grisaille Paint Layers. Applied Sciences12(20), 10515. https://doi.org/10.3390/app122010515

Martins, J. N. R., Silva, E. J. N. L., Marques, D., Ajuz, N., Rito Pereira, M., Pereira da Costa, R., Braz Fernandes, F. M., & Versiani, M. A. (2022). Characterization of the file‐specific heat‐treated ProTaper Ultimate rotary system. International Endodontic Journal. https://doi.org/10.1111/iej.13880

Melo, D., Paiva, T. G., Lopes, J. A., Corvo, M. C., & Sequeira, S. O. (2022). Characterization of Fungal Melanins from Black Stains on Paper Artefacts. Heritage5(4), 3049–3065. https://doi.org/10.3390/heritage5040158

Meneses, M. J., Patarrão, R. S., Pinheiro, T., Coelho, I., Carriço, N., Marques, A. C., Romão, A., Nabais, J., Fortunato, E., Raposo, J. F., & Macedo, M. P. (2022). Leveraging the future of diagnosis and management of diabetes: From old indexes to new technologies. European Journal of Clinical Investigation. https://doi.org/10.1111/eci.13934

Oliveira, J., Almeida, P. L., Sobral, R. G., Lourenço, N. D., & Gaudêncio, S. P. (2022). Marine-Derived Actinomycetes: Biodegradation of Plastics and Formation of PHA Bioplastics—A Circular Bioeconomy Approach. Marine Drugs20(12), 760. https://doi.org/10.3390/md20120760

Panigrahi, S., Calmeiro, T., Mendes, M. J., Águas, H., Fortunato, E., & Martins, R. (2022). Observation of Grain Boundary Passivation and Charge Distribution in Perovskite Films Improved with Anti-solvent Treatment. The Journal of Physical Chemistry C126(45), 19367–19375. https://doi.org/10.1021/acs.jpcc.2c05055

Papanastasiou, D. T., Carlos, E., Muñoz-Rojas, D., Jiménez, C., Pimentel, A., Fortunato, E., Martins, R., & Bellet, D. (2022). Fully Solution-Based AgNW/AlO x Nanocomposites for Stable Transparent Heaters. ACS Applied Electronic Materials4(12), 5816–5824. https://doi.org/10.1021/acsaelm.2c01007

Pinheiro, T., Correia, R., Morais, M., Coelho, J., Fortunato, E., Sales, M. G. F., Marques, A. C., & Martins, R. (2022). Water Peel-Off Transfer of Electronically Enhanced, Paper-Based Laser-Induced Graphene for Wearable Electronics. ACS Nano16(12), 20633–20646. https://doi.org/10.1021/acsnano.2c07596

Pires, J. R. A., Souza, V. G. L., Gomes, L. A., Coelhoso, I. M., Godinho, M. H., & Fernando, A. L. (2022). Micro and nanocellulose extracted from energy crops as reinforcement agents in chitosan films. Industrial Crops and Products186, 115247. https://doi.org/10.1016/j.indcrop.2022.115247

Pivetta, T. P., Ferreira, Q., Vieira, T., Silva, J. C., Simões, S., Ribeiro, P. A., & Raposo, M. (2022). Liposomes encapsulating methylene blue and acridine orange: An approach for phototherapy of skin cancer. Colloids and Surfaces B: Biointerfaces220, 112901. https://doi.org/10.1016/j.colsurfb.2022.112901

Rodrigues, T. A., Cipriano Farias, F. W., Zhang, K., Shamsolhodaei, A., Shen, J., Zhou, N., Schell, N., Capek, J., Polatidis, E., Santos, T. G., & Oliveira, J. P. (2022). Wire and arc additive manufacturing of 316L stainless steel/Inconel 625 functionally graded material: development and characterization. Journal of Materials Research and Technology21, 237–251. https://doi.org/10.1016/j.jmrt.2022.08.169

Serrazina, R., Pereira, L., Vilarinho, P. M., & Senos, A. M. (2022). Atmosphere-Assisted FLASH Sintering of Nanometric Potassium Sodium Niobate. Nanomaterials12(19), 3415. https://doi.org/10.3390/nano12193415

Serrazina, R., Tkach, A., Pereira, L., Senos, A. M. O. R., & Vilarinho, P. M. (2022). Flash Sintered Potassium Sodium Niobate: High-Performance Piezoelectric Ceramics at Low Thermal Budget Processing. Materials15(19), 6603. https://doi.org/10.3390/ma15196603

Shen, J., Gonçalves, R., Choi, Y. T., Lopes, J. G., Yang, J., Schell, N., Kim, H. S., & Oliveira, J. P. (2022). Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal. Materials Science and Engineering: A857, 144025. https://doi.org/10.1016/j.msea.2022.144025

Tipa, C., Cidade, M. T., Borges, J. P., Costa, L. C., Silva, J. C., & Soares, P. I. P. (2022). Clay-Based Nanocomposite Hydrogels for Biomedical Applications: A Review. Nanomaterials12(19), 3308. https://doi.org/10.3390/nano12193308

Viveiros, R., Maia, L. B., Corvo, M. C., Bonifácio, V. D. B., Heggie, W., & Casimiro, T. (2022). Enzyme-inspired dry-powder polymeric catalyst for green and fast pharmaceutical manufacturing processes. Catalysis Communications172, 106537. https://doi.org/10.1016/j.catcom.2022.106537

Zuo, X., Zhang, W., Chen, Y., Oliveira, J. P., Zeng, Z., Li, Y., Luo, Z., & Ao, S. (2022). Wire-based directed energy deposition of NiTiTa shape memory alloys: Microstructure, phase transformation, electrochemistry, X-ray visibility and mechanical properties. Additive Manufacturing59, 103115. https://doi.org/10.1016/j.addma.2022.103115

Publications (by year)