Recent Publications

Bianchi, C., Marques, A., & Ferreira, I. (2023). Photothermoelectric AZO/SiO 2 /NiO Device. Advanced Materials Technologies. https://doi.org/10.1002/admt.202300133 IF.: 6,8

Rafique, A., Sequeira, I., Bento, A. S., Moniz, M. P., Carmo, J., Oliveira, E., Oliveira, J. P., Marques, A., Ferreira, I., & Baptista, A. C. (2023). A facile blow spinning technique for green cellulose acetate/polystyrene composite separator for flexible energy storage devices. Chemical Engineering Journal, 464, 142515. https://doi.org/10.1016/j.cej.2023.142515 IF.: 15,1

Figueira, J., Bonito, R. M., Carvalho, J. T., Vieira, E. M. F., Gaspar, C., Loureiro, J., Correia, J. H., Fortunato, E., Martins, R., & Pereira, L. (2023). Screen-printed, flexible, and eco-friendly thermoelectric touch sensors based on ethyl cellulose and graphite flakes inks. Flexible and Printed Electronics, 8(2), 025001. https://doi.org/10.1088/2058-8585/acc114 IF.: 3,1

Pieranski, P., & Godinho, M. H. (2023). Fertile metastability. Liquid Crystals, 1–16. https://doi.org/10.1080/02678292.2022.2161653 IF.: 2,2

Lago, B., Brito, M., Almeida, C. M. M., Ferreira, I., & Baptista, A. C. (2023). Functionalisation of Electrospun Cellulose Acetate Membranes with PEDOT and PPy for Electronic Controlled Drug Release. Nanomaterials, 13(9), 1493. https://doi.org/10.3390/nano13091493 IF.: 5,3

Coelho, B. J., Pinto, J. V, Martins, J., Rovisco, A., Barquinha, P., Fortunato, E., Baptista, P. V, Martins, R., & Igreja, R. (2023). Parylene C as a Multipurpose Material for Electronics and Microfluidics. Polymers, 15(10), 2277. https://doi.org/10.3390/polym15102277 IF.: 5

Santos, I. M., Alexandre, M., Mihailetchi, V. D., Silva, J. A., Mateus, T., Mouquinho, A., Boane, J., Vicente, A. T., Nunes, D., Menda, U. D., Águas, H., Fortunato, E., Martins, R., & Mendes, M. J. (2023). Optically‐Boosted Planar IBC Solar Cells with Electrically‐Harmless Photonic Nanocoatings. Advanced Optical Materials. https://doi.org/10.1002/adom.202300276 IF.: 9

Carvalho, J. P. F., Vieira, T., Silva, J. C., Soares, P. I. P., Ferreira, N. M., Amorim, C. O., Teixeira, S. S., & Graça, M. P. F. (2023). Potassium Ferrite for Biomedical Applications. Materials, 16(10), 3880. https://doi.org/10.3390/ma16103880 IF.: 3,4

Coelho, B. J., Neto, J. P., Sieira, B., Moura, A. T., Fortunato, E., Martins, R., Baptista, P. V, Igreja, R., & Águas, H. (2023). Hybrid Digital-Droplet Microfluidic Chip for Applications in Droplet Digital Nucleic Acid Amplification: Design, Fabrication and Characterization. Sensors, 23(10), 4927. https://doi.org/10.3390/s23104927 IF.: 3,9

Viana, A. M., Leonardes, F., Corvo, M. C., Balula, S. S., & Cunha-Silva, L. (2023). Effective Combination of the Metal Centers in MOF-Based Materials toward Sustainable Oxidation Catalysts. Materials, 16(8), 3133. https://doi.org/10.3390/ma16083133 IF.: 3,6

Lopes, J. G., Rocha, P., Santana, D. A., Shen, J., Maawad, E., Schell, N., Coury, F. G., & Oliveira, J. P. (2023). Impact of Arc‐Based Welding on the Microstructure Evolution and Mechanical Properties in Newly Developed Cr 29.7 Co 29.7 Ni 35.4 Al 4 Ti 1.2 Multi‐Principal Element Alloy. Advanced Engineering Materials. https://doi.org/10.1002/adem.202300109 IF.: 3,6

Serrati, D. S. M., Machado, M. A., Oliveira, J. P., & Santos, T. G. (2023). Non-Destructive Testing Inspection for Metal Components Produced Using Wire and Arc Additive Manufacturing. Metals, 13(4), 648. https://doi.org/10.3390/met13040648 IF.: 2,9

Santos, A. F. M., Figueirinhas, J. L., Dias, C. J., Godinho, M. H., Branco, L. C., & Dionísio, M. (2023). Study of the mesomorphic properties and conductivity of n-alkyl-2-picolinium ionic liquid crystals. Journal of Molecular Liquids, 377, 121456. https://doi.org/10.1016/j.molliq.2023.121456 IF.: 6

Liu, H., Lv, S., Xuan, Y., Oliveira, J. P., Schell, N., Shen, J., Deng, J., Wang, Y., & Yang, J. (2023). Effects of Heat Input on Weld Microstructure and Properties in Keyhole TIG Welding of Invar 36 Alloy. Materials, 16(10), 3692. https://doi.org/10.3390/ma16103692 IF.: 3,2

Liu, Y., Wang, X., Oliveira, J. P., He, J., & Guan, X. (2023). Spatial and directional characterization of wire and arc additive manufactured aluminum alloy using phased array ultrasonic backscattering method. Ultrasonics, 132, 107024. https://doi.org/10.1016/j.ultras.2023.107024 IF.: 4,2

Moreira, F., Ferreira, P. M., Silva, R. J. C., Santos, T. G., & Vidal, C. (2023). Aluminium-Based Dissimilar Alloys Surface Composites Reinforced with Functional Microparticles Produced by Upward Friction Stir Processing. Coatings, 13(5), 962. https://doi.org/10.3390/coatings13050962 IF.: 3,4

Chakkravarthy, V., Oliveira, J. P., Mahomed, A., Yu, N., Manojkumar, P., Lakshmanan, M., Zhang, L., Raja, V., Jerome, S., Prabhu, T. R., & Narayan, R. L. (2023). Effect of abrasive water jet peening on NaCl-induced hot corrosion behavior of Ti–6Al–4V. Vacuum, 210, 111872. https://doi.org/10.1016/j.vacuum.2023.111872 IF.: 4

Abdellatif, M., Louafi, Y., Nunes, D., Freire, T., Fortunato, E., Martins, R., Kabouche, S., & Trari, M. (2023). Studies on photocatalytic degradation of Rhodamine B using the valentinite Sb2O3. Reaction Kinetics, Mechanisms and Catalysis, 136(3), 1643–1655. https://doi.org/10.1007/s11144-023-02411-1 IF.: 1,8

Teshome, F. B., Peng, B., Oliveira, J. P., Shen, J., Ao, S., Li, H., Chen, L., Tan, C., Song, X., Zhou, N., & Zeng, Z. (2023). Role of Pd interlayer on NiTi to Ti6Al4V laser welded joints: Microstructural evolution and strengthening mechanisms. Materials & Design, 228, 111845. https://doi.org/10.1016/j.matdes.2023.111845 IF.: 8,4

Cordeiro, T., Matos, I., Danède, F., Sotomayor, J. C., Fonseca, I. M., Corvo, M. C., Dionísio, M., Viciosa, M. T., Affouard, F., & Correia, N. T. (2023). Evidence of Strong Guest–Host Interactions in Simvastatin Loaded in Mesoporous Silica MCM-41. Pharmaceutics, 15(5), 1320. https://doi.org/10.3390/pharmaceutics15051320 IF.: 5,4

Lopes, L. D., Pavan, L. P., Gonçalves, I. L., Goncalves, P. F. B., dos Santos, F. P., João Bortoluzzi, A., Faita, F. L., da Rosa, R. R., & Merlo, A. A. (2023). Origin of the Monolayer and Bilayer Arrangement in Smectic A and C Mesophases and Nematic Cybotactic Domains: The Case Study of Benzyloxy-Terminated Isoxazole Liquid Crystals. Crystal Growth & Design, 23(5), 3113–3127. https://doi.org/10.1021/acs.cgd.2c01101 IF.: 3,8

Martins, J. N. R., Silva, E. J. N. L., Baruwa, A. O., Pereira da Costa, R., Braz Fernandes, F. M., & Versiani, M. A. (2023). Comparative analysis of reciprocating and flat‐side heat‐treated rotary single‐file systems: Design, metallurgical characteristics, and mechanical performance. International Endodontic Journal, 56(7), 896–908. https://doi.org/10.1111/iej.13920 IF.: 5

Valério, P., Soares, J., Alves, L. C., Silva, R. J. C., Fátima Araújo, M., & Tavares da Silva, C. (2023). Chalcolithic copper production and use in the western end of the Iberian Peninsula: The testimony of Castro de Chibanes (Portugal). Journal of Archaeological Science: Reports, 48, 103868. https://doi.org/10.1016/j.jasrep.2023.103868 IF.: 1,6

Xu, J., Jiang, Q., Yang, J., Cui, J., Zhao, Y., Zheng, M., Oliveira, J. P., Zeng, Z., Pan, R., & Chen, S. (2023). A Review on Ultrafast Laser Microwelding of Transparent Materials and Transparent Material–Metals. Metals, 13(5), 876. https://doi.org/10.3390/met13050876 IF.: 2,9

Lee, S., Choi, H. W., Figueiredo, C. L., Shin, D.-W., Moncunill, F. M., Ullrich, K., Sinopoli, S., Jovančić, P., Yang, J., Lee, H., Eisenreich, M., Emanuele, U., Nicotera, S., Santos, A., Igreja, R., Marrani, A., Momentè, R., Gomes, J., Jung, S.-M., … Kim, J. M. (2023). Truly form-factor–free industrially scalable system integration for electronic textile architectures with multifunctional fiber devices. Science Advances, 9(16). https://doi.org/10.1126/sciadv.adf4049 IF.: 13,6

Manjakkal, L., Jain, A., Nandy, S., Goswami, S., Tiago Carvalho, J., Pereira, L., See, C. H., Pillai, S. C., & Hogg, R. A. (2023). Sustainable electrochemical energy storage devices using natural bast fibres. Chemical Engineering Journal, 465, 142845. https://doi.org/10.1016/j.cej.2023.142845 IF.: 15,1

Ribamar, G. G., Escobar, J. D., Kwiatkowski da Silva, A., Schell, N., Ávila, J. A., Nishikawa, A. S., Oliveira, J. P., & Goldenstein, H. (2023). Austenite carbon enrichment and decomposition during quenching and tempering of high silicon high carbon bearing steel. Acta Materialia, 247, 118742. https://doi.org/10.1016/j.actamat.2023.118742 IF.: 9,4

Valério, P., Correia, J. E., Corregidor, V., Silva, R. J. C., Soares, R. M., Ramos, R., Albuquerque, P., Cabrita, L. M. G., Miguel, L., Nabais, M., Paulo, L. C., Monge Soares, A. M., & Araújo, M. F. (2023). Composition and manufacture of a rare gold example of the Mesopotamian “tree of life” iconography and coeval jewellery in southwestern Iberian Peninsula. Archaeological and Anthropological Sciences, 15(7), 96. https://doi.org/10.1007/s12520-023-01801-9 - IF.: 2,2